How to Flash Tecno Phantom V2 Fold (AE10) Stock Firmware (SP Flash Tool) — Fix Bootloop, Unbrick & FRP
This guide covers how to flash Tecno Phantom V2 Fold stock firmware end to end — the tool, the driver, the exact steps and the faults it fixes (bootloop, brick, FRP, corrupt system). The Tecno Phantom V2 Fold runs on the MediaTek Dimensity 9000+ chipset, so it flashes with SP Flash Tool (SPFT) — the MediaTek flashing app for Windows. ROM Palace hosts 9 official stock firmware files for this model as a free, resume-supported direct download.
Before you start
- Back up anything you can — flashing erases the phone.
- Charge the battery above 50% so it cannot die mid-flash.
- Confirm your exact model code (AE10) in Settings > About phone or on the box — flashing another model’s firmware can brick the device.
- Use a Windows PC and a good-quality USB data cable (not a charge-only cable).
💡 Flashing the wrong firmware, or pulling the cable during a flash, can hard-brick the phone. Only use the firmware listed for the Tecno Phantom V2 Fold on its ROM Palace page.
What you need
- The Tecno Phantom V2 Fold stock firmware — download it free from the Tecno Phantom V2 Fold firmware page on ROM Palace.
- SP Flash Tool (SPFT) — the MediaTek flashing app for Windows.
- the MediaTek USB VCOM / preloader driver installed on the PC so the tool can see the phone.
How to flash Tecno Phantom V2 Fold stock firmware
- Install the MediaTek USB VCOM (preloader) driver on your Windows PC, then open SP Flash Tool.
- In SP Flash Tool, click Scatter-loading and select the MTxxxx_Android_scatter.txt file from the extracted firmware.
- Leave the mode on Download Only (this keeps your IMEI safe) and click Download.
- Power the phone off completely and remove it from the cable.
- Connect the powered-off phone to the PC — the tool detects the preloader and the progress bar starts. On some models you hold Volume Down while plugging in.
- Wait until a green tick appears (Download OK). Do not unplug before that.
- Unplug and power on — the first boot after a flash can take a few minutes.
💡 The Tecno Phantom V2 Fold uses a MediaTek Dimensity 9000+ SoC — a "PMT changed" or "chip type not match" error means the scatter/firmware is for a different model — use only the file listed for this exact device.
Common problems and fixes
- Stuck in a bootloop after an update: flash the matching stock firmware from this page to restore a clean system.
- Tool never detects the phone: reinstall the MediaTek USB VCOM / preloader driver, try another USB 2.0 port, and connect with the phone fully off.
- FRP / Google account lock after a reset: flashing the full stock firmware clears the locked system partition.
- Battery drains fast or the phone won’t hold a charge after an update: reflash the stock firmware; if it persists, the 5750 mAh · 70W cell itself may be worn.
- Failed or interrupted OTA: a clean stock flash is the safe way back to a bootable system.
Tecno Phantom V2 Fold specifications
The specs below are what the Tecno Phantom V2 Fold firmware on this site targets:
| Spec | Detail |
|---|---|
| Chipset | MediaTek Dimensity 9000+ |
| Display | 7.85" LTPO AMOLED · 120Hz |
| Battery | 5750 mAh · 70W |
| Camera | Main 50 MP; Ultrawide 50 MP; Telephoto 50 MP; Front 32 MP |
| Software | Android 15 |
| Model code | AE10 |
⬇️ Need the software? Download official Tecno Phantom V2 Fold stock firmware free on ROM Palace — direct links, no waiting queue.
Frequently asked questions
What tool flashes the Tecno Phantom V2 Fold?
The Tecno Phantom V2 Fold uses the MediaTek Dimensity 9000+ chipset, so it flashes with the MediaTek SP Flash Tool with the firmware’s scatter file on Windows. Load the firmware, arm the tool, then connect the powered-off phone.
Where can I download Tecno Phantom V2 Fold stock firmware for free?
ROM Palace hosts 9 official stock firmware files for the Tecno Phantom V2 Fold as a free, direct, resume-supported download — no queue, no quota, no sign-up. Open the model’s firmware page and pick the build for your region.
Will flashing fix a bootloop or FRP lock on the Tecno Phantom V2 Fold?
Yes. Flashing the matching stock firmware rewrites the system and boot partitions, which clears a bootloop, a corrupt update or an FRP/Google lock left after a factory reset. Always use the firmware listed for your exact model code.