Home / Articles / ZTE Blade A55
Troubleshooting ZTE Blade A55 firmware Updated 2026-07-13

ZTE Blade A55 Common Problems & Troubleshooting (Won’t Turn On, Charging, Signal)

The most common hardware and software faults are covered below. Here is that fault list with sensible first steps. When a software fault is suspected, reflashing the stock firmware is often the fastest fix; for board-level faults, follow the teardown reference’s flowcharts.

Faults the teardown reference covers

  • Battery failure
  • Startup failure (won’t turn on)
  • System crashes
  • Automatically powers off / restarts
  • Charging failure
  • nano-SIM card not detected
  • microSDXC card not detected
  • No transmitted voice
  • No received voice
  • No ringtone
  • No vibration
  • Touch screen fault
  • Display failure
  • Camera failure
  • Side key fault
  • No signal
  • No outgoing calls
  • Wi-Fi / FM / GPS / Bluetooth failure
  • Headset not detected

First things to try

  1. Confirm the fault with the built-in test: dial *#*#983#*#*, then *983*673636#, then *983*70# to run the automatic function test.
  2. For won’t-turn-on or random restarts, charge for 30 minutes with a known-good charger and cable first — a flat battery can look like a hardware fault.
  3. For crashes, freezes or a fault that started after an update, reflash the official stock firmware.
  4. For no-SIM / no-signal, reseat the SIM and test a second known-good SIM before opening the phone.
  5. If a hardware fault remains, have it checked by a qualified repair technician.

💡 If a fault persists after these checks, have the mainboard inspected by a qualified repair technician.

⬇️ Need the software? Download official ZTE Blade A55 stock firmware free on ROM Palace — direct links, no waiting queue.

Frequently asked questions

My ZTE Blade A55 won’t turn on — what should I do?

Charge it for 30 minutes with a good charger first; a flat battery is the most common cause. If it still won’t start, reflash the stock firmware, then follow the startup-failure flowchart in the teardown reference.

The ZTE Blade A55 won’t charge — how do I fix it?

Try another charger and cable, clean the USB-C port, and check the battery. If it still fails, the charging circuit or sub-board is likely at fault — see the charging-failure section of the teardown reference.

More ZTE Blade A55 guides